Mazda MX5 Mk1/2 (NA/NB) Big Disc upgrade - Front

Mazda MX5 Mk1/2 (NA/NB) Big Disc upgrade - Front

£66.67 Sale

The front kit utilises the standard 1.8 Mk1 and Mk2 calipers, and is designed to fit to the 1989-1991 VW Corrado 280mm front brake discs

The 29mm larger diameter disc gives a bigger thermal mass to transfer heat and allows for greater brake torque. This translates to a reduction in brake fade and more braking power.

The kit is supplied with:
1x pair front caliper carrier custom adaptors
1x pair custom spigot rings
Required bolts to fit brackets to car.

The longer front hoses and Corrado G60 front discs are available seperately.

Please note, this brake kit is made to order, so may have a leadtime of approximately 7-10 working days.

QUESTIONS & ANSWERS

Ask a Question

  • Which brake hoses are needed for this, as I cannot see any listed? Ta

    You would need these for the adaptors:
    https://freakyparts.co.uk/products/hel-braided-brake-hose-kit?variant=5870682439718
    The MX5 Mk2.5 Sport Front hoses. 

  • Hi there, I'm looking to get the "Mazda MX5 Mk1/2 (NA/NB) Big Disc upgrade - Front" for my MK1 mx5 1.6. Could you advise me on what else I need for the installation and also what parts I should get to tackle the rear brakes, will the Mazda MX5 Mk1/2 (NA/NB) Big Disc upgrade - Rear be suitable, if so, please could you advise me on what I will need to purchase. Thanks in advance

    This kit is designed to fit the 1.8 carriers and calipers, so you would require those, along with 1.8 pads to fit the adaptors and 280mm front discs.

  • Would I need to fit bigger wheels ? I have the 15 inch Enkeis

    If you’re fitting it inline, the ends don’t matter as both fittings are easily available in the UK

  • Are the 1.6 calipers on the mk1 not the same as the 1.8?

    The carriers used on the 1.6 are different to the 1.8, so you would need these carriers to fit to the adaptors. The 1.6 calipers can be used (if fitted upside down) and 1.8 pads also.